Changing filter cartridge
Replace filter cartridge with a new and reset
Before you withdraw old filter, do not
turn on water for 2 minutes
According to description of steps
1,2,3 «step by step installation of 1» -
«Installing filter cartridge 4», replace
old filter with a new (Figure 1,2,3)
After switching on, press «Select»
and select a new filter cartridge on
which indicator lights. Press and hold
«Reset» button for 3 seconds after
you hear the buzzer, the light goes off.
Reset completed successfully (Figure
4)
After installing filter, be sure within 10
minutes to run water through on water
purifier
Note:
You need to get rid of water, to
rinse filter cartridges and tubes. You
may see a grayish water or water with
bubbles, it is normal to drain water until
it is clear.
Note:
you must do a factory reset of a new filter cartridge, or an incorrect
count will continue its life
Reset Wi-Fi
Press
simultaneously
for 3 seconds
Select
Reset
After changing password of router or Wi-Fi, you
need to reset Wi-Fi. At the same time, click on
button «Select» and «Reset» button and hold
for three seconds. Flashing orange LED and
audible alarms indicate a successful reset Wi-
Fi.
Rinsing adapter
Periodically rinse inside of adapter from
precipitation of impurities and other
particulates to prevent clogging of adapter,
because it affects quality and water supply
rate. Clearing adapter should be returned to
its original place steel mesh and O-ring.
To remove sensor unit:
With one hand hold mixer, and with second -
pull connector down, thereby removing sensor
unit.
To remove adapter and wash:
Remove adapter and clean it.
loosen and rinse
for dismantling pull down
XIAOMI-MI.COM