Take fan assembly apart, then turn the front grille counterclock-
wise until it separates from the rear grille, as shown in Figure
①
.
Remove the fan blade assembly as indicated by Figure
②
.
Installation Instructions
Step 2: Open the fan assembly
Fan Assembly
front grille
fan blade assembly
rear grille
①
②
２
11
12
13
２
Align the center hole of the fan blade assembly with the motor's
shaft and install it onto the shaft, then install fan blade
assembly knob onto the motor's shaft. Turn the knob counter-
clockwise in order to fix the fan blade assembly to the motor's
shaft.
５
４
４
Step 3: Install the rear grille
Step 4: Install the fan blade assembly
Figure
Figure
Firstly, install the rear grille to the motor's shaft with " " facing
upwards, and then install fan grille knob onto the shaft. Turn
the knob clockwise to firmly fix the rear grille to the motor's
shaft.
５
2
.
Turn the front grille clockwise until the Front Grille Alignment
Mark aligns the Rear Grille Right Alignment Mark. Make sure the
grilles are securely fastened.
Insert fan grille screw into the hole
at the bottom of the fan grille. Turn the
screw clockwise by using the
A
Allen
key to tighten it.
Step 6: Fasten the front grille
８
８
６
６
Installation Instructions
Step 5: Install the front grille
Connect the power cable to the power port on the base and then
plug it into a power outlet. When you hear a beep, the fan is
successfully connected to the power supply.
Connect to a power outlet
How to Use
Press the button to start the fan. When turned on for the first
time, the default speed is slow (1). After turning off the fan and
turning it back on again, the speed will be the last used one.
When the fan is working, press and hold the button to stop it.
Turn on/off
Turn on
Turn off
Press the button to adjust the speed. With each press, the
speed will go up one level and the corresponding status indicator(s)
will be on (see the table below). After turbo (4), the speed will return
to slow (1).
Adjust speed & switch mode
Adjust speed
Note
：
means the indicator is on;
means the indicator is off.
Indicator
Status
Fan Speed
Slow (1)
Medium (2)
Fast (3)
Turbo (4)
Top View before
Fastening the Front
& Rear Grille
Front Grille
Alignment Mark
Front Grille
Alignment Mark
Rear Grille Right
Alignment Mark
Rear Grille Left
Alignment Mark
Top View after Fastening
the Front & Rear Grille
1
.
Align Front Grille Alignment Mark with Rear Grille
Left Alignment Mark, and make sure the front grille is properly
embedded into the rear grille.
11
13
11
13
15
14
