How to Use
Press and hold the button to switch between direct and natural
breeze. The indicator is on while in natural breeze mode and is off
while in direct breeze mode. The speed will not be changed when
switching modes.
Note: The factory default is direct breeze mode. After turning off the fan and turning it
back on again, the mode will be the last used one.
Switching mode
Note
：
means the indicator is on;
means the indicator is off.
Press the button to enable or disable 140° oscillation. After
turning off the fan and turning it back on again, the oscillation
setting will be the last used one.Unplug then plug the fan in or reset
the Wi-Fi connection, then turn on the fan. It will automatically
oscillate its angle if enabling the oscillation function. The oscillation
time varies depending on different angles, please wait with
patience.
Control oscillation
Press the button to adjust the scheduled turn-off time. With
each press, the scheduled turn-off time will cycle through 1 hour, 2
hours, 3 hours, 4 hours and disabled, and the corresponding status
indicator(s) will be on (see the table below). Five seconds after
using the scheduled turn-off function, the status indicator will
return to the corresponding status of the currently selected speed.
Set scheduled turn-off
Scheduled
Status
Indicator
Status
Disabled 1 hour
2 hours 3 hours
4 hours
This product works with Mi Home/Xiaomi Home app*.Control
your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the
app.You will be directed to the connection setup
page if the app is installed already.Or search"Mi
Home/Xiaomi Home"in the app Store to download
and install it.
Open Mi Home/Xiaomi Home app, tap"+"on the
upper right,and then follow prompts to add your
device.
*The app is referred to as Xiaomi Home app in Europe
(except for Russia).The name of the app displayed on
your device should be taken as the defaut.
Note:The version of Mi Home app might have been
updated,plase follow the instructions based on the
current app version.
Connect with the Mi Home App
Adjust the Airflow Direction
Gently lift or push down
the fan's head or fan grille
to adjust the airflow
upwards or downwards.
23 upwards
16 downwards
°
°
Simultaneously press and hold the buttons and . Once
you hear a beep, the fan is awaiting a connection, then you
can pair it with a device via the app.
Connecting to Wi-Fi
Wi-Fi Indicator Status
How to Use
Daily Care & Maintenance
Clean the Fan
The parts listed below can be cleaned with a soft cloth or sponge
using water or neutral detergent.
Note: Stop and unplug the fan, then disassemble it and clean its parts. After
cleaning, make sure all parts are completely dry before installing them and using
the fan again. Avoid direct sunlight.
Fan Grille Knob
５
Wi-Fi Status
Indicator
Status
Blinking orange
Blinking blue
Blue
Orange
Awaiting
connection
Connecting
Connected Couldn't connect
Front Grille
Fan Blade
Assembly
Rear Grille
11
12
13
The Wi-Fi connection needs to be reset on the circumstances listed
in the table below.
Simultaneously press and hold the buttons and . Once you
hear a long beep, the Wi-Fi connection has been reset successfully
and then the Wi-Fi is awaiting a connection.
Reset Wi-Fi
The Mi account that the fan is paired with has been changed.
The router that the fan is connected to has been changed.
The account or password of the router that the fan is connected to has been changed.
The Mi Home/Xiaomi Home app cannot control the fan.
Parts that cannot be washed
Parts that can be washed
The parts listed below can be wiped clean with a soft dry cloth.
Motor & Stand
１
Base
３
Fan Blade
Assembly Knob
４
Note: Do not use water to rinse the parts above. Do
not use thinner, gasoline, detergent or alkaline
detergent.
17
16
