Cleaning & Maintenance
If the clean/wrror indicator blinks for 5 seconds and then goes off
while the battery level indicator is on after the shaver is turned on,
please clean the shaver. The clean/error indicator will automatically
blink for 5 seconds once every 15 minutes of use to remind the user to
regularly clean stubble buildup from the shaver.
1.Make sure the shaver is turned off and is not being charged before
cleaning it.
2. Rinse the shaving
head under a faucet
(warm water is
recommended).
3. Pull the shaving
head and remove
it from the holder.
4. Rinse or use the
cleaning brush to
clean the shaving
head holder.
5. Turn the shaving
head upside-down and
clean the inside of the
shaving head under a
faucet. Warm water is
recommended. Do not
use a towel or paper
towel to clean the
shaving head.
6. Thoroughly dry off
the shaver, then
install the shaving
head back onto the
holder.
Note: Use the
protective cover to
cover the charging
port while cleaning
the shaver. Make
sure the charging
port is dry when
plugging in the
cable to charge.
The shaver can be cleaned under faucet. To Keep the
charging porty dry, make sure it is firmly covered.
Note: To ensure the performance of the shaver, it is recommended to
replace the shaving head once every 2 years. Please go to www.mi.com
to purchase a replacement.
