How to connect Xiaomi Mi AirDots?
● To switch on the pairing mode, you must hold both Xiaomi Mi
AirDots, or more precisely, their touch panels located on the outside,
a few seconds until the white lights are illuminated. After that, only
the right earphone will blink – this means that the Xiaomi Mi AirDots
are available for pairing with your device.
● Go to the Bluetooth device settings to which you want to connect
the Xiaomi Mi AirDots. In the available devices will appear MI
AIRDOTS BASIC_R-this is your Xiaomi Mi AirDots.
Thus the device is connected to the right earphone and that already
connects the left. The right earphone is the main one, but at the same
time they can be connected separately and used as a Bluetooth
headset, even on different devices-in this case, the available devices
will display MI AIRDOTS BASIC_R or MI AIRDOTS BASIC_L,
respectively, in Depending on the connected earphone. The method of
connection is similar, but we hold the touchpad of one necessary
earphone.
Xiaomi Mi AirDots Control playback and calls
● Single tap – Pause playback or answer an incoming call.
● Double-tap to call a voice assistant.
● Hold one or more seconds to cancel the call.
● Double-tapping during the call – mute the microphone.
● While turning on and off, the female voice says some Chinese words.
● Xiaomi Mi AirDots work with any voice assistant: Siri, Google
Assistant, Alice.
To disconnect and reset the Xiaomi Mi AirDots, hold the touch pad for
a few seconds until the red lights are illuminated.
If you remove the earphone from the ear while using it, the playback
does not stop as in AirPods. They are switched off only when they are
in the case and are connected back to the device when not in the
Briefcase.
