background image

OWNER’S MANUAL — Please read before using this equipment.

©

2000 Tandy Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by Tandy Corporation.

Voice Activated Audionic Earphone

FEATURES

Your RadioShack Voice-Activated Audionic Ear-
phone makes it easier and safer to use your hand-
held transceiver. The ultra-light weight speaker/
microphone combined with voice-activation makes
hands-free communications a breeze. You can con-
tinue your activities without interrupting your com-
munication. Just connect the earphone’s plugs to
the jacks on your transceiver.

You can use this earphone with many of the
RadioShack handheld amateur radio, business
band, Family Radio Service, citizen's band, and
GMRS tranceivers that have external microphone
and speaker jacks.

The earphone is also compatible with Icom, Stan-
dard, Yaesu, and Alinco transceivers.

The earphone’s features include:

Voice Activation Control (VOX) — you can set the
earphone to automatically activate the transceiver
so you transmit only when you speak.

VOX High/Low Positions — lets you adjust the mi-
crophone's sensitivity to your voice level.

Push-To-Talk (PTT) Button — lets you manually
switch between transmitting and receiving.

Combination Mic/Earpiece — translates your voice
into electrical signal for the transceiver during trans-
mission, and acts as a normal earphone during re-
ception.

Low-Power Circuitry — operates for more than
180 hours on one AAA alkaline battery (not sup-
plied).

One Small and Two Large Replacement Earpiec-
es 
— provide a comfortable fit for any size ear open-
ing.

PREPARATION

Installing the Battery

You need one AAA battery (not supplied) to operate
the earphone. For the longest battery life, we recom-
mend a RadioShack alkaline battery. Follow these
steps to install the battery.

1. Press down on the battery compartment cover

and slide away from the clip.

2. Install the battery in the compartment as indi-

cated by the polarity symbols (+ and –) marked
inside.

3. Replace the cover.

Note: If you are using VOX and the transceiver does
not switch to transmit when you begin speaking, re-
place the battery.

Using the Clip

You can use the clip to attach the earphone's control
box to a pocket or belt.

21-1833.fm Page 1 Wednesday, May 17, 2000 8:30 AM

Summary of Contents for Voice Activated Audionic Earphone

Page 1: ...y when you speak VOX High Low Positions lets you adjust the mi crophone s sensitivity to your voice level Push To Talk PTT Button lets you manually switch between transmitting and receiving Combination Mic Earpiece translates your voice into electrical signal for the transceiver during trans mission and acts as a normal earphone during re ception Low Power Circuitry operates for more than 180 hour...

Page 2: ...hone s cord or con trol box near the transceiver s antenna If the cord or the control box is too close to the antenna the range might be reduced or the control box might not cor rectly switch the transceiver between transmit and receive PTT Push to Talk Button Operation You can use the PTT button to manually switch be tween transmitting and receiving 1 Set the function switch to OFF PTT 2 Press PT...

Page 3: ...RE To enjoy your earphone for a long time Keep the earphone dry If it gets wet wipe it dry immediately Use and store the earphone only in normal tem perature environments Handle the earphone gently and carefully Do not drop it Keep the earphone away from dust and dirt Wipe the earphone with a damp cloth occasion ally to keep it looking new Modifying or tampering with the earphone s internal compon...

Page 4: ... defect during the warranty period take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store RadioShack will at its option un less otherwise provided by law a correct the defect by product repair without charge for parts and labor b replace the product with one of the same or similar design or c refund the purchase price All replaced parts and products and...

Reviews: