9
Display and Buttons Instructions
When using the electric tangle-free brush bar, electric mite brush, crevice
nozzle, or brush nozzle, the vacuum cleaner uses the Auto Mode as the default,
and the Auto Mode will show on the display.
Status Indicator
Battery Level Indicator
• Green: Battery level > 20%
• Red: Battery level ≤ 20%
Lock Button
• Press to switch between Non-continuous Mode
and Continuous Mode.
Suction Level/Language Button
• Press to cycle through the vacuum cleaner's
suction levels of Eco, Auto, and Turbo.
• Press and hold for 3 seconds to enter the
language setup, and then press to switch
the language. To use the selected language,
press and hold the button for 3 seconds or no
operation for 5 seconds.
Working Modes
Non-continuous Mode
Hold down the power button to start the vacuum cleaner,
then release to stop it.
Continuous Mode
Press the button to switch to Continuous Mode. Press
the power button of the vacuum cleaner, it will work
continuously; press the power button again, it will stop
working.
Care & Maintenance
Precautions:
• Always use genuine parts to ensure normal operation and to keep your
warranty valid.
• If any rotating part becomes stuck, the vacuum cleaner may shut off
automatically. Remove any trapped foreign objects, then resume use.
• Before cleaning, remove the brush head from the vacuum cleaner to prevent
accidentally turning on the vacuum cleaner, which can cause injury.
• If the vacuum cleaner will not be used for an extended period, fully charge
it and disconnect it from the power then store it in a cool, low-humidity
environment away from direct sunlight.
• To avoid over-discharging the battery, recharge the vacuum cleaner at least
once every three months.
Cleaning the Vacuum Cleaner
Wipe the vacuum cleaner with a soft, dry cloth.
Auto