Sleep Mode
Place the earphones back into the charging case and close the lid, the earphones will disconnect and go into sleep mode
automatically.
Wearing
Take the earphones out of the charging case, and insert them into your ears according to the left (L) and right (R) marks.
Note:
After using the earphones, place them back into the charging case. This will extend their lifespan and help you avoid
losing or misplacing them.
Connecting
●
Connecting the earphones to a new device
1. Make sure that the earphones are placed in the charging case, and press and hold the function button for two seconds
when the charging case's lid is opened. The indicator will start blinking white to indicate that the earphones are awaiting a
connection. If the earphones are not connected for one minute, they will enter the sleep mode and the indicator will turn off.
2. Enable the device's Bluetooth, then search for and connect to the "Xiaomi Buds 3 Star Wars". If a passcode is requested,
enter "0000".
Note:
Before using the earphones for the first time, please place them into the charging case and press and hold the function
button for five seconds to activate them. Once activated, the earphones will automatically enter the awaiting connection
state.
●
Clearing connection history
1. Place the earphones into the charging case.
2. Press and hold the charging case's function button for at least 10 seconds, and release it once the indicator stays white.
The earphones have been reset, and the connection history has been cleared. The charging case's indicator blinks white, and
the earphones are in pairing mode again.
Note:
Due to the connection characteristics of the Bluetooth signal, in dense environments with 2.4 GHz electromagnetic
signal interferences, there may be occasional disconnects or no sound.
05
