2
1 +
2
Lift the safety lock and push down the quick release
lever again, then fold the stem.
1
Lift the safety lock, and push down the quick release lever.
Fold & Carry
3
4
4
3 +
2
1
Align the bell and the
buckle and hook them.
4
Hold the stem with either one hand
or both hands to carry.
Disengage the bell lever from the
buckle on the mudguard.
5
3
Open
Before adjustment, make sure the scooter is powered off and not charging.
If the brake is too tight/loose, use the 4 mm Allen key to loosen the screw on the caliper. Then slightly adjust the brake line
(decrease/increase the exposed length), and tighten the screw again.
Brake Cable
Adjust the Disc Brake
Inflate the Tire
Note: please check the tire pressure regularly, and inflate the tire if its pressure is insufficient.
Unscrew the valve cap.
Connect the extension nozzle to the
tire valve stem.
Connect the pump to inflate the tire.
Valve Cap
