Filter replace
The FILTER icon lighting up indicates that it is time to replace the filter. Replace the filter
according to the following instruction then press the RESET button and hold for 30
seconds to restart the system, the warning light will off.
Position of reset button: on the right side, open the cover you can see the red button,
1.
Open the front cover.
2.
Remove the combination filter by pull the two strips in both sides.
3.
Insert new combination filter into the unit.
4.
Reattach the front cover of the unit and securely latch into place.
5.
Press and hold reset button for 30 seconds to reset filter.
▲Pre-filter maintenance
-The pre-filter can be washed by water directly, and make sure it’s dry when place back to
the appliance.
-Do not use sharp object to clean the pre-filter, in case any damage.
-Pre-filter should be replaced with the rest filters.
▲HEPA and Activated Carbon filter maintenance and replace
-Every three months, take off the HEPA and Activated Carbon filter, put it under the
sunshine to make it dry and use vacuum cleaner or soft brush to clean the dust on the filter.
It will help extend the life of the filter and keep the HEPA filter performance.
