Xhorse SK283, User Manual

Page: 10 / 48

BMW TOOL User Manual
10
Ver: 1.1
following types: CAS1, CAS2, CAS3/CAS3+, CAS3++, CAS3++ (ISTAP),
CAS4 etc.
CAS3/CAS3+: This means CAS should be CAS3 (0L01Y) or
CAS3+(0L15Y)(not encrypt version)
CAS3++: This means detected CAS3+ encrypt version
CAS3++ (ISTAP): find ISTAP version

VIN : Vehicle identification number

Prod. Date : CAS production date

HW/Cod.Index : CAS hardware version and coding version

MSV/FSV/OSV : MSV running in CAS, software version and system version
(PICTURE 4.2)

Read EEPROM : Support Read CAS1/CAS2/CAS3/CAS3+ (ISTAP version not
support) EEPROM. For CAS1/CAS2/CAS3 type require CAS PLUG; CAS3+ can use
OBDII or CAS PLUG. Attention: the read EEPROM for CAS3+ is not the whole
EEPROM, You can’t write it to CAS with BDM programmer, it can use to prepare
dealer key with File Make Key

Write EEPROM : Support write CAS1/CAS2/CAS3 EEPROM dump by OBDII,
requires CAS PLUG
 Save to File… / Load From File…
: Save the reading data / load EEPROM dump to
buffer

Read KM : Read KM stored in CAS system, support CAS1/CAS2/CAS3/CAS3+
(ISTAP version not support). CAS1, CAS2, CAS3 require CAS PLUG; CAS3+ can
access by OBDII and CAS PLUG

Write KM : Write new KM to CAS, support CAS1/CAS2/CAS3/CAS3+ (ISTAP version
not support). CAS1, CAS2, CAS3 require CAS PLUG; CAS3+ can access by OBDII