XHIFI, INC.
465 PIKE ROAD
●
UNIT 112
●
HUNTINGDON VALLEY
●
PENNSYLVANIA
●
19006-1621
●
USA
866-55-XHIFI
●
267-288-0199
●
267-288-0198 FAX
●
www.xhifi.com
Page 13 of 14
Phase Shift
It is possible to change the system’s bass response in accordance with the conditions of the
listening environment and the location of the XDSW1 subwoofer.
•
Set at a position where preferred bass response is achieved.
Troubleshooting
Symptom
Possible Cause
Action
Power does not come on.
Is AC power cord
disconnected from the AC
outlet?
Plug the AC power cord
firmly into the AC outlet.
Echo-like or shallow sound
reproduction from main
speakers
MASTER VOLUME
control is set too low
Turn up the MASTER
VOLUME control until
sound fills out optimally.
(See pages 11-13.)
Are the MASTER
VOLUME or
SUBWOOFER VOLUME
knobs turned to the “MIN”
position?
Turn up the volume knob(s)
until a suitable level is found.
(See pages 11-13.)
Connections are incorrect, or
loose.
Check connections and make
the necessary corrections.
(See pages 5 & 6.)
No sound is heard.
Is the source’s volume
control (if applicable) turned
all the way down, or is its
signal extremely weak?
See the procedures for
operation. (See pages 11-13.)
The sound fluctuates
between loud and soft.
The protective circuit is
active.
Lower the volume of the
source to a level that does
not activate the protective
circuit. (See page 12.)
