XHIFI, INC.
465 PIKE ROAD
●
UNIT 112
●
HUNTINGDON VALLEY
●
PENNSYLVANIA
●
19006-1621
●
USA
866-55-XHIFI
●
267-288-0199
●
267-288-0198 FAX
●
www.xhifi.com
Page 11 of 14
Connections (continued):
•
The XDC-1 accepts low-level stereo signal sources, such as home or portable CD/DVD players,
mp3 players, computer soundcards, gaming consoles, etc. It will also accept the tape or preamp
output from a receiver or preamp (we suggest the preamp output as it allows for volume control).
•
Some sources (such as computer soundcards and portable mp3/CD players) only output through
3.5mm connectors; for these applications, use of a 3.5mm/2 RCA Cable (included), or a 3.5mm/2
RCA Adapter (available through Xhifi) is required.
•
The XDC-1 employs two different volume controls, one for the subwoofer only, and one “master”
for the entire system (consisting of both speakers PLUS subwoofer). If the signal source also
employs a volume control, please consider using this when operating the system (see below).
•
Utilizing a crossover fixed at 230 Hz, the subwoofer divides the incoming signal into two parts,
retains the bass portion, then sends the midrange/treble portion to the main speakers. The
XDSW1 subwoofer can be used as a stand-alone subwoofer, but please note that the speaker
output terminals on the XDSW1 will remain active (for connection to the XD1 Satellite Speaker
ONLY).
•
Make all connections before the plugging the AC power cord into an AC Outlet.
Operation
•
STANDBY/ON lamp (with auto power on/off function) – applicable to XDSW1 Subwoofer ONLY
When the POWER button is pressed to ON, the STANDBY/ON lamp lights up green. If about 30 minutes elapse with no signals, the mode
switches to the standby mode, and the STANDBY/ON lamp lights red.
When audio signals are input, the mode automatically becomes the ON mode, and the STANDBY/ON lamp lights green.
ON mode: STANDBY/ON lamp lights green.
Standby mode: STANDBY/ON lamp lights red.
