XGIMI Halo+, User Manual, Page: 10 / 187

When you use the device for the first time, the mistouch prevention feature
is enabled. Therefore, press the device's power button twice to power on the
device. We recommend that you connect the device to the power source during
its first-time use.
Getting Started
Device on/off
Device Status
Power Off
Power button of the
remote control
Power Off
Hibernate
Hibernate
Power button of the device
Press the device's power button to trigger the
instructions on the screen. Long press the device's
power button as instructed
Press the device's power button to trigger the
instructions on the screen. Short press the device's
power button again as instructed
Press the power button of the remote control and
select an action as instructed on the screen
Action Trigger How to Trigger
Display Off
Press the power button of the
device or the remote control
Press the power button of the
remote control or the device
Power Off
Hibernate
Press the device's power
button twice
This mode is suitable for outing because it
saves the battery life and avoids start-up due
to accidental touch
It consumes little battery. The device will
reboot quickly next time
Only the display is switched off. Other parts
are still working
Device Status How to Enable Description
6