xFusion Digital Technologies FusionServer XH321C V6, Manual, Page: 20 / 65

FusionServer XH321C V6 Liquid-cooled Server Node
Technical White Paper
5 Hardware Description
2022-09-10 20
Port Type Quantity Description
iBMC direct
connect
management
port/debugging
serial port USB Type-C 1
⚫
Uses a USB Type-C cable to
connect a local PC or mobile
phone to the server node iBMC
to monitor and manage the
system.
NOTE
Only local PCs running Windows 10
and mobile phones running Android
are supported.
⚫ To log in to the iBMC from the
local PC, enter
https://IP address
of the iBMC management network
port
in the address box of the
browser on the local PC.
⚫ When accessing the iBMC
through a mobile phone, you need
to use the mobile application
FusionMobile to access the iBMC.
For details, see the FusionMobile
User Guide .
⚫
Connects to a Type-C-to-serial
port (RJ45) to implement the
debugging function.
Management
network port RJ45 1 iBMC management network port,
which is used to manage the
server.
NOTE
The management network port is a
GE port that supports 100 Mbit/s and
1000 Mbit/s auto-negotiation.
PSU socket - 1 Used to connect to a power
distribution unit (PDU) through a
power cable. You can select the
PSUs as required.
NOTE
When determining the PSUs, ensure
that the sum of rated power of all
PSUs is greater than that of the server.
5.1.4 Installation Positions
The XH321C V6 nodes are installed in the 4 slots on the rear of a 2 U X6000 V6 chassis,
which can house a maximum of 4 XH321C V6 nodes.