xFusion Digital Technologies FusionServer XH321C V6, Manual

Page: 17 / 65

FusionServer XH321C V6 Liquid-cooled Server Node
Technical White Paper
5 Hardware Description
2022-09-10 17
Silkscreen Indicator/Butt
on Description
Power button:
⚫
When the device is powered on, you can press this
button to gracefully shut down the OS.
NOTE
For different OSs, you may need to shut down the OS as
prompted.
⚫ When the device is powered on, you can hold
down this button for 6 seconds to forcibly power
off the device.
⚫
When the power indicator is steady yellow, you
can press this button to power on the device.
Health status
indicator ⚫ Off: The device is powered off or is faulty.
⚫ Blinking red at 1 Hz: A major alarm has been
generated on the system.
⚫ Blinking red at 5 Hz: A critical alarm has been
generated on the system.
⚫ Steady green: The device is operating properly.
UID
button/indicator The UID button/indicator helps identify and locate a
device.
UID indicator:
⚫ Off: The device is not being located.
⚫ Blinking or steady blue: The device is being
located.
UID button:
⚫ You can control the UID indicator status by
pressing the UID button or using the iBMC.
⚫
You can press this button to turn on or off the
UID indicator.
⚫ You can press and hold down this button for 4 to
6 seconds to reset the iBMC.
- iBMC direct
connect
management
port indicator Indicates the status when the iBMC direct connect
management port connects to a terminal (local PC or
Android mobile phone):
⚫
Off: No terminal is connected.
⚫
Blinking green at short intervals for 3 seconds and
then off: The port is disabled.
⚫ Steady green: The terminal is connected.
- Data
transmission
status indicator
for the
management
network port ⚫ Off: No data is being transmitted.
⚫ Blinking yellow: Data is being transmitted.