xFusion Digital Technologies 02313LSK Manual Download Page 17

Page: 17 / 131

FusionServer 5288 V6 Server
Technical White Paper

5 Hardware Description

2022-06-25

FlexIO card 1 presence
indicator

FlexIO card 2 presence
indicator

iBMC direct connect
management port indicator

Indicator and Button Descriptions

Table 5-1

Description of indicators and buttons on the front panel

Silkscreen

Indicator and
Button

Description

Fault diagnosis
LED

⚫

---: The device is operating properly.

⚫

Error code: A component is faulty.

For details about error codes, see the

FusionServer Rack Server iBMC Alarm Handling

Power
button/indicator

Power indicator:

⚫

Off: The device is not powered on.

⚫

Steady green: The device is powered on.

⚫

Blinking yellow: The iBMC is starting. The power
button is locked and cannot be pressed. The iBMC
is started in about 1 minute, and then the power
indicator is steady yellow.

⚫

Steady yellow: The device is standby.

Power button:

⚫

When the device is powered on, you can press this
button to gracefully shut down the OS.

NOTE

For different OSs, you may need to shut down the OS as
prompted.

⚫

When the device is powered on, you can hold
down this button for 6 seconds to forcibly power
off the device.

⚫

When the power indicator is steady yellow, you
can press this button to power on the device.

Health status
indicator

⚫

Off: The device is powered off or is faulty.

⚫

Blinking red at 1 Hz: A major alarm has been
generated on the system.

⚫

Blinking red at 5 Hz: A critical alarm has been
generated on the system.

⚫

Steady green: The device is operating properly.

UID
button/indicator

The UID button/indicator helps identify and locate a
device.

UID indicator:

Summary of Contents for 02313LSK




































































































































Search results

Summary of Contents for 02313LSK

Reviews:

Brands by name

Popular brands

xFusion Digital Technologies 02313LSK, Manual

Search results

Summary of Contents for 02313LSK

Reviews:

Brands by name

Popular brands