background image

 

 

XetaWave LLC warrants your XetaWave wireless data transceiver against defects in 

materials and manufacturing for a period of two years from the date of purchase.  In the 

event of a product failure due to materials or workmanship, XetaWave will, at its 

discretion, repair or replace the product. 

In no event, will XetaWave LLC, its suppliers or its licensors, be liable for any damages 

arising from the use of or the inability to use this product.  This includes business 

interruption, loss of business information, or other loss which may arise from the use of 

this product.  XetaWave LLC transceivers should not be used in situations where failure 

to transmit or receive data could result in damage of any kind to the user or any other 

party, including but not limited to personal injury, death, or loss of property.  XetaWave 

LLC accepts no responsibility for damages of any kind resulting from delays or errors in 

data transmitted or received using the XetaWave transceiver, or for the failure of such 

transceiver to transmit or receive such data. 

Warranty policy may not apply: 

1)

 

If product repair, adjustments, or parts replacements is required due to 

accident, neglect or unusual physical, electrical or electromagnetic stress. 

2)

 

If product is used outside of XetaWave specifications. 

3)

 

If product has been modified, repaired or altered by Customer unless XetaWave 

specifically authorized such alterations in each instance in writing.  

The warranty period begins from the date of shipment and is defined per the standard 

warranty policy stated above. 

Information in this document is subject to change without notice.  The information 

contained in this document is proprietary and confidential to XetaWave LLC.  This 

manual is for use by purchasers and other authorized users of the XetaWave wireless 

data transceiver only. 

No part of this document may be reproduced or transmitted in any form or by any 

means, electronic or mechanical, or for any purpose without the express written 

permission of XetaWave LLC. 

This product is licensed by the United States.  Diversion contrary to U.S. law is 

prohibited.  Shipment or re-export of this product outside of the United States may 

require authorization by the U.S. Bureau of Export Administration.  Please contact 

XetaWave LLC for assistance and further information. 

 

 

 

Warranty 

 

Summary of Contents for XETA4-TMFA


















Reviews: