2
Federal Communications Commission
This device complies with Title 47 CFR
§
Parts 1, 15, 80, and 90 of the federal code.
Specifically, 47CFR § 1.1310, Table 1, Limits for General Population/Uncontrolled
Exposure.
This device must be operated as supplied by XetaWave LLC. Any changes or
modifications made to the device without the express written approval of XetaWave LLC
may void the user’s authority to operate the device, pose violations and liabilities.
Caution
The Xeta2m-T has a nominal (rated) transmitter output power of:
-
All modulations and bandwidths in the 217-220 MHz band: 2 Watts
-
MSK, 15 KHz, 220-222 MHz: 3 Watts
-
MSK, 50 KHz, 220-222 MHz: 2 Watts
-
All other modulations and bandwidths, 220-222 MHZ: 5 Watts
The transmit antenna shall be kept at least 61.65cm
from physical space where humans
may exist.
Additional details may be found in the “RF Exposure Calculations” at the end of this
section.
Integration FCC ID:
When the module is installed inside of another device, then the outside of the device
into which the module is installed must display a label referring to the enclosed module.
The exterior label will use the wording: ‘Contains FCC ID: PEJ-XETA2’
Serial # X00000000 1234 1234
Model # XETA2-E
Contains FCC ID: PEJ-XETA2
Input Voltage: 12 VDC
This device compiles with Part 80 and Part 90 of the FCC rules.
Made in the USA by Xetawave, LLC
Louisville, CO 80027 (303) 447-2745
www.xetawave.com
FCC
Notifications
