Technical Information
ENGLISH
33
Xerox© LCD Monitor User’s Manual
Before consulting service personnel, check the following
chart for a possible cause and solution to the trouble you are
experiencing.
Monitor will not turn on
•
Make sure the power cord is plugged in.
No picture
•
Make sure the power cord is plugged in.
•
Check the signal cable connecting the LCD monitor
and the computer (refer to page 14-17).
•
Press the
POWER/
button on the front panel of the
monitor.
Poor picture or abnormal picture
•
Check the signal cable connecting the LCD monitor
and the computer (refer to page 14-17).
•
Press the button to adjust the Brightness Contrast
options in the OSD.
•
Adjust the Color Select option in the OSD.
•
Press the
button on the front panel of the monitor,
to automatically adjust the display mode.
Out of range message appears
•
Press the
button on the front panel of the monitor,
to automatically adjust the display mode.
•
Press the button to adjust the V Position, H Position
and H Size options in the OSD.
•
If using Windows 9X/2000/XP, wait a few seconds;
once Windows detects the problem, a dialog will
appear allowing you to manually set up the video
mode according to the preset mode timing chart
(refer to page 29).
Troubleshooting