Xerox WorkCentre XL Series, User Manual

Page: 58 / 65

49
Problem Solving
Status Code Chart
Status
Code
Suggested Solution
Ensure that there is paper in the selected paper tray. Ensure
that the Paper Tray is closed properly.
Paper may not have fed all the way into the WorkCentre.
(Refer to
Loading Paper and Flashing
P
. )
E1
E2
E3
E4
E5
Copy paper has misfed. (Refer to Clearing the Paper
Path .)
J1
The toner indicator on the WorkCentre diagram will light
when the toner supply is low. Approximately 10 more copies
can be made, but you should have a replacement cartridge
in stock. When the
J1 status code is displayed, the machine
will stop operating until the toner cartridge is replaced.
J2 The drum cartridge indicator on the WorkCentre diagram
lights when the drum is near the end of life. Approximately
1,000 more copies can be made, but you should have a
replacement cartridge in stock. When the
J2 status code is
displayed, the machine will stop operating until the Drum
Cartridge is replaced.
C1 The Front or Side Cover is open. Close the cover.
CH Install the Toner Cartridge.
A1 – A2 Remove misfed paper from the Automatic Document
Feeder. Refer to
A1 – A2 Automatic Document Feeder
Misfeed for detailed instructions.
L1 Ensure that the Shipping Screw is removed.
E7
H2 – H4
L3 – L5
U2 – U5
Switch OFF the main power. Wait approximately 5 seconds.
Switch ON the main power. If the status code continues,
visit website
www.xerox.com .