Xerox WorkCentre XL Series, User Manual

Page: 31 / 65

22
Bypass Tray
(XL2120 / XL2130f)
Use the Bypass Tray to copy onto paper that is different from
that loaded in the paper tray and to copy onto special stock such
as envelopes, labels, or transparencies. Stock is fed one sheet
at a time into the Bypass Tray.
The minimum copy size is 3.5
×
5.5"/ A6. The maximum copy
paper size is 8.5
×
14" / 216
×
356mm.
Load special stock as follows:
Predrilled paper: holes toward the rear of the copier.
Letterhead paper: face down with the top toward the left.
Envelopes: flap side up and toward the rear.
Labels: face down.
Transparencies: removable stripe face up and toward the rear.
•
Use labels, transparencies, and envelopes specifically
designed for copiers (high temperatures).
1. Place the original face down and align it with the
Registration Guide on the Document Glass and close the
Document Cover.
XL2130f
Unless the Automatic Document Feeder (ADF) auto start
has been disabled, the Bypass Tray cannot be selected.
2. Adjust the Bypass Tray Paper Guide to the width of the copy
paper.