background image

7

Safety Notes

Slots and Openings 

in the cabinet and in the back and sides of the WorkCentre are provided for

ventilation.  To ensure reliable operation of the WorkCentre and to protect it from overheating, these
openings must not be blocked or covered.  The WorkCentre should never be located near or over a
radiator or heat register.  This WorkCentre should not be placed in a built-in installation unless
proper ventilation is provided.

Never 

push objects of any kind into the slots of the WorkCentre as they may touch dangerous

voltage points or short out parts which could result in a fire or electric shock.

Never 

spill liquid of any kind on the WorkCentre.

Never 

remove covers or guards that require a tool for removal.  There are no casual operator

serviceable areas within these covers.

Never 

defeat interlock switches.  Machines are designed to restrict operator access to unsafe

areas.  Covers, guards, and interlock switches are provided to ensure that the machine will not
operate with covers opened.

Use of an extension cord with this WorkCentre is not recommended or authorized.

Avoid 

direct viewing of the document lights.  The lamps are bright and, while not harmful, they may

cause an annoying afterimage.  Always keep the document cover closed during operation and
storage.

Avoid 

exposing the drum cartridge to light for extended periods of time.

Do not

 touch the green photoreceptor.  Scratches or smudges that appear on the photoreceptor will

result in poor copy quality and may shorten the service life.

Do not

 put your hands into the fuser area, as you may be burned.

Ozone: 

 This product produces ozone during normal operation.  The ozone produced is dependent

on copy volume and is heavier than air.  Providing the correct environmental parameter, as specified
in the Xerox installation procedures, ensures that concentration levels meet safe limits.

If you need additional safety information concerning the WorkCentre or Xerox supplied materials,
you may call the following toll-free number.

In the United States or Canada: 

 1 – 800 – 828 – 6571

Summary of Contents for WorkCentre XE90








Reviews: