30
Installation for Windows 3.1x and Windows NT 4.0. 95
or
98
The Printer Driver Installation software cannot be installed using the
Control
Panel/Printers
for Win 3.1x or the
Add Printer Wizard
for Win
95/98/NT4.0. Please use one of the following methods depending on your
operating system.
1. Ensure that the computer and the
WorkCentre are turned off.
2.
Plug the IEEE-1284 cable into the
parallel port on the WorkCentre.
3.
Plug the other end of the IEEE-1284
cable into the computer.
4.
Turn on the PC.
NOTE: Be sure to close all applications before installing the printer driver.
5.
Start Windows on your computer.
6.
Insert the WorkCentre XE CD-ROM into the CD-ROM Drive.
7.
For
Installation of 3.1x:
Choose
File
from the menu bar in Program
Manager, and then choose the
Run…
command.
For
Installation for Windows NT 4.0, 95 or 98
:
Click on the
Start
button and then choose the
Run
menu option.
8.
Type
D:\SETUP
(or the appropriate drive letter depending on your CD-
ROM Drive) in the command line box. Click on the
OK
button to
proceed.
9.
Follow the on-screen instructions.
10. For Installation of Windows 3.1x:
When the install is complete,
ensure that the power cord is plugged into the WorkCentre and then
into a grounded outlet. Restart Windows and turn on the WorkCentre.
For
Installation for NT 4.0, 95 or 98
:
When the installation is
complete, ensure that the power cord is plugged into the WorkCentre
and then into a grounded outlet. You will be asked whether or not to
print a test page. If you wish to do so, load paper, turn on the
WorkCentre and then click the
Yes
button.
