Xerox WorkCentre Pro 128, Supplementary Manual

Page: 7 / 147

Quick Scan to Mailbox Setup
Xerox WorkCentre
®
Pro 123/128/133
5
3. From the device, select Scan to Mailbox .
a.
Select the mailbox number to which you want to scan the document.
b. Load the sample document into the document feeder.
c. Press the Start button.
4.
Verify that the scanned document is in the mailbox:
a. Select the mailbox number to which the document was scanned.
b. Select Document List .
Procedure for Scan to Mailbox Setup through the Control Panel
1.
From the
All Services
menu, select
Setup Menu
.
2. Select Mailbox .
3. Select Create/Delete .
4. Use the keypad to enter required information.
Note
If a password is entered for a mailbox, no one else can access that mailbox before entering
the password.
5.
From the
All Services
menu, select
Scan to Mailbox
.
a. Select the mailbox number to which you want to scan the document.
b. Load the sample document into the document feeder.
c.
Press the Start button.
6. Verify that the scanned document is in the mailbox:
a.
Select the mailbox number to which the document was scanned.
b. Select Document List .