Xerox WorkCentre Pro 128, User Manual

Page: 12 / 54

2 Operation with Windows 95/98/Me
12 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide
Configuration Tab Settings
This section describes the settings of the Configuration tab.
Select the function that you want to set in the Features List and change the settings in the
Change box below.
NOTE: You can restore defaults by clicking [Restore Defaults].
NOTE: The settings that can be selected vary depending on which options have been
installed. Change these settings only after confirming that the option settings are
complete. See
Options Tab Settings on page 14 .
Settings
Image Enhancement - Specifies whether or not to use the Image Enhancement function.
Selecting [On] smooths out boundaries when printing. This reduces jagged edges by artificially
increasing the resolution of the image. When printing a bitmapped image composed of coarse
halftone dots, smooth color gradation is impossible in certain situations. In this case, select [Off].
Draft Mode - Specifies whether or not to reduce the amount of toner used when printing drafts.
When [On] is selected, the overall printed color becomes lighter. This is best for printing
documents when high print quality is not necessary.
Print Mode - Specifies whether to give priority to the print speed or the image quality.
Stapling - Specifies whether or not to staple printed documents and the position of the staple.
You can staple 2 to 50 sheets of 80 g/m
2
or lighter paper.