background image

Maintenance

WorkCentre® C2424 Copier-Printer

7-32

Adding Ink

You can load ink any time the system is idle, or when the control panel displays the 

Ink low

 or 

Add Ink 

message.

Note

To minimize waste ink and optimize performance, leave the printer on all the time.

Keep ink in its packaging until you are ready to use it.

Identify ink by shape, not color.

To avoid ink jams, never insert broken ink sticks into the ink-loading bins.

Caution

Use of other than Genuine Xerox WorkCentre C2424 Solid Ink may affect print quality 
and system reliability. It is the only ink designed and manufactured under strict quality 
controls by Xerox for specific use with this system. The Xerox Warranty, Service 
Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or 
degradation of performance caused by use of non-Xerox supplies, or the use of Xerox 
supplies not specified for this system.

Note

The Total Satisfaction Guarantee is available in the United States and Canada. 
Coverage may vary outside these areas; please contact your local representative for 
details. 

Videos are available with instructions for adding ink. Videos are located on the 

User Documentation CD-ROM

 and at 

www.xerox.com/office/c2424support

.

Summary of Contents for WORKCENTRE C2424





















Reviews: