dc10cc0465
Customer Support
Page 14
Finishing Comment Commands
OFFSET
This feature provides a physical offset of hard copy that distinguishes between sets or stacks within a job.
PJL SET Cmd
PS Cmd
@PJL SET JOBOFFSET=
string
<</Jog
int
>>
Where
string
is:
ON
OFF
Where
int
is:
0 = no offset
3 = offset each set
OUTPUT DESTINATION
Indicates the output bin where the print job is sent.
Tray
PS Set Page
PJL Command
Simple Catch Tray
Offset Catch Tray
/OutputType (MiddleTray)
@PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_MIDDLE;
Top output tray of finisher
/OutputType (TopTray)
@PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_TOP;
Finisher stacker tray
/OutPutType (Stacker)
@PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_STACKER;
Booklet Maker Bin
No Command
No command required, this is the only
possible physical destination for Bi-Fold and
Booklet Finishing jobs
Envelope Folder
No Command
No command required, this is the only
possible physical destination for C and Z Tri-
Folded Jobs
Auto
Omit Command
Omit Command