SMB
Xerox WorkCentre 7232/7242 System Administration Guide
183
•
When [Receiving Buffer - SMB] is set to [No Spooling]:
All print data in the receiving buffer, including the data currently being printed, is
deleted. There is no print data on the machine when the machine is subsequently
switched on.
However, if the machine is switched off immediately after a print request, the print
data may be stored on the client. In this case, the print request can be reissued when
the machine is subsequently turned on, and the print data is printed on the machine
in turn.
When printing
•
When [Receiving Buffer - SMB] is set to [Spool to Hard Disk] or [Spool to Memory]:
Print data cannot be received if the print data size exceeds the available capacity of
the hard disk or memory allocation.
NOTE:
If the print data exceeds the receiving buffer capacity, the client may retransmit
the same print data. In this case, stop the client and make sure that the client does not
transmit the print data.
•
When [Receiving Buffer - SMB] is set to [No Spooling]:
Print requests cannot be received from a client if a print request from another client
is being processed.
•
When the client IP address or computer name is changed:
When the client IP address or computer name is changed, the machine cannot
perform query processing and cancel processing. Turn the machine off and on with
the receiving buffer empty of print data.
NOTE:
Stopping printing or forced deleting of print data in the machine receiving
buffer can be performed using the control panel.
•
When the machine is offline:
If a client issues a print request when the machine is offline, the print data cannot be
received, and a write error is generated and displayed in an error dialog box on the
client.
•
Deleting jobs:
On Windows NT 4.0, jobs can be deleted if Service Pack 4 or later is installed.
Deleting a job while receiving print data generates a write error. In this case, the
button to retry printing on the error dialog box is disabled.
Printing using an SMB environment
•
On Windows NT 4.0, Windows 2000, Windows XP or Windows Vista, printing in an
SMB environment is not available when Unicode support is active.
•
On Windows XP or Windows Vista, the user name may not be correctly displayed
when printing on an SMB port.
•
On Windows Vista in IPv6 environment, the machine is not displayed in a list of
networked computers.
Summary of Contents for WorkCentre 7232
