Xerox WorkCentre 5890, Service Manual

Page: 148 / 153

August 2015
5-147 Xerox® WorkCentre® 5890 Family
PL 90.17
Parts Lists
PL 90.17 Developer Assembly (45-55
ppm)
Item Part Description
1 – Toner dispense module (P/O PL
90.17 Item 27) (REP 90.5)
2 – Developer module (P/O PL 90.17
Item 26) (See NOTE 1) (REP 90.2)
3 – Retaining bracket (Not Spared)
4 – Toner cartridge (REF: PL 26.11
Item 3) (See NOTE 2)
5 – Low toner sensor (Q93-310) (P/O
PL 90.17 Item 13)
6 – Registration/Developer bias
harness (Not Spared)
7 – Toner concentration sensor (Q92-
601) (P/O PL 90.17 Item 2)
8 – Not used
9 – Not used
10 – Not used
11 – Stepped washer (Not Spared)
12 – Washer (Not Spared)
13 – Out of toner sensor kit (REF: PL
31.13 Item 8)
14 – Push on fastener (P/O PL 90.17
Item 23)
15 – Spring (P/O PL 90.17 Item 23)
16 – Sleeve (P/O PL 90.17 Item 23)
17 – Toner cartridge latch (P/O PL 90.17
Item 23)
18 – Not used
19 – Trickle outlet shutter kit (REF: PL
31.12 Item 3)
20 – Shutter assembly (P/O PL 90.17
Item 19)
21 – Shutter spring (P/O PL 90.17 Item
19)
22 – Push on fastener (P/O PL 90.17
Item 19)
23 604K30560 Developer latch repair kit
24 – Developer material (P/O PL 90.17
Item 25, PL 90.17 Item 26)
25 604K84590 Developer charge kit
26 604K84570 Developer spares kit (includes
developer)
27 – Toner dispense module kit (REF:
PL 31.12 Item 1)
NOTE: 1. To remove and replenish the developer material,
refer to the developer charge kit, PL 90.17 Item 25.
NOTE: 2. A waste toner bottle, PL 90.10 Item 1 is supplied
with the toner cartridges.
www
MK-Electronic
de