Xerox WORKCENTRE 5135, Secure Installation And Operation

Page: 8 / 11

7
•
Web Services – Allows the System Administrator to set up various Web Services that utilize the HTTP protocol. Is accessible
by selecting the Properties tab and then selecting Connectivity
Æ
Protocols
Æ
HTTP
Æ
Web Services tab from the
Properties tab content menu .
•
NTP - Allows the System Administrator to set the device date and time using an external server. Is accessible by selecting
the
Properties tab and then selecting Connectivity
Æ
Protocols
Æ
NTP from the Properties tab content menu .
•
FTP – Allows the System Administrator to set the parameters for the FTP protocol used in network filing. Is accessible by
selecting the Properties tab and then selecting Connectivity
Æ
Protocols
Æ
FTP from the Properties tab content menu .
•
WSD (Web Services for Devices) – Allows the System Administrator to enable Web Services on the device. Is accessible by
selecting the Properties tab and then selecting Connectivity
Æ
Protocols
Æ
WSD (Web Services for Devices) from the
Properties tab content menu .
•
E-mail Domain Filter – Allows the System Administrator to set how address books search domains for E-mail addresses. Is
accessible by selecting the Properties tab and then selecting Services
Æ
E-mail
Æ
Domain Filter from the Properties tab
content menu .
•
Web Services Advanced Setting s – Allows the System Administrator to clear the Web Services IP Address Lockout cache. Is
accessible by either (1) selecting the Properties tab and then selecting Connectivity
Æ
Protocols
Æ
HTTP
Æ
Web Services
tab
Æ
Advanced Settings button from the Properties tab content menu or (2) by typing http://{IP
Address}
7
/diagnostics/ipLockout.php.
•
(Workflow Scanning) Display Setting s – Allows the System Administrator to setup how the Workflow Scanning template
list is displayed on the Local UI. Is accessible by either (1) selecting the
Properties
tab and then selecting
Services
Æ
Workflow Scanning
Æ
Display Settings from the Properties tab content menu or (2) selecting the ‘ Refer to Display
Settings for more template controls ’ hyperlink from any of the scan and network scanning template pages.
•
Validation Options – Permits the System Administrator to allow the user name to be sent with the validation request if the
user is authenticated at the Local UI. Is accessible by selecting the Properties tab and then selecting Services
Æ
Custom
Services
Æ
Validation Options from the Properties tab content menu .
•
Fax Forward on Receive – Allows the System Administrator to enable forwarding of receive Embedded Faxes to alternate
destinations such as E-mail addresses or file repositories. Is accessible by selecting the Properties tab and then selecting
Services
Æ
Embedded Fax
Æ
Fax Forward from the Properties tab content menu. From the Fax Forward on Receive page
the System Administrator can access the following pages to setup Fax Forward on Receive:
•
Edit – Displays the Rule page to set or modify the alternate destinations for a received Embedded Fax.
•
Customize – Displays the Custom File Name or Custom Attachment Name page, depending on the type of alternate
destination, to customize the name of the file or attachment the received Embedded Fax will be stored in.
•
Authentication Configuration – CAC (Common Access Card) - Provides ability to set up the Domain Controller and other
elements needed to configure CAC authentication on a WorkCentre™ 5135/5150. The main
Authentication Configuration >
CAC/PIV Setup page is accessible by selecting the following entries from the Properties 'Content menu’: Security
Æ
Authentication Configuration
Æ
Edit or Configure (Device User Interface Authentication Method) button (where [CAC/PIV]
is the Device User Interface Authentication Method chosen on the Authentication Configuration Setup page); from that
page the other pages needed to configure CAC are accessible. When configuring the CAC domain controller the System
Administrator should make sure that the Port Number entered is less than 65536.
•
System Timeout – Permits the System Administrator to set up a WebUI inactivity timer for the device. Is accessible by
selecting the Properties tab and then selecting Security
Æ
System Timeout from the Properties tab content menu .
•
Application Domain/Content Query - Allows the configuration of the system to perform an LDAP query for the logged-in
user’s authentication domain prior to authenticating the server. Is accessible by typing http://{IP
Address}
8
/diagnostics/index.dhtml and then selecting ‘ Authentication Domain/Context Query ’ from the Diagnostics
Content Menu.
•
Scanning Lock Files - Allows bypassing the filename locking feature. Is accessible by typing http://{IP
Address}
9
/diagnostics/index.dhtml and then selecting ‘ Scanning Lock Files ’ from the Diagnostics Content Menu or by
typing http://{IP Address}
4
/diagnostics/lockFiles.dhtml .
•
Secure Attribute Editor - Allows the user to change some system attributes related to PDLs (e.g., memory usage, copies per
page, etc.). Is accessible by typing http://{IP Address}
9
/diagnostics/secureattr.dhtml .
•
Suppress Job Name - Allows the System Administrator to suppress displaying the job name on the Banner Page when
submitting a print job. Is accessible by typing http://{IP Address}
9
/diagnostics/jobNameSuppress.dhtml .
7
{IP Address} is the IPv4 address of the machine