Page 110 5: B4 6: 8.5 x 14 inches 7: 8.5 x 13 inches 9: A4 10: 8.5 x 11 customs 14: B5 16 16: B5 16: 8.5 x 11 inches 18:
A5 23: B5 56: 8.5 x 13.4 inches 134: document expected 8-12 Workcende 5019/5021 page processing .2 3: 1 210
prevents the scales of downsizing defined as a factor value of 25-400 % (during the copy) to set a value between 25 and
400 % (standard: 81 %) (in passages of 1 minute). Workcenter 5019/5021 8-13 user manual ... Page 112 2: Normal* 3:
Sharp +1 4: Sharp +2 4002 from the setting of the damping level. This function is 0: level 1 oppression is available if a
black and white image is scanned. 1: level 2* level of the document (copy). 2: Level 3 3: Level 4 4: level 5 8-14
WorkCentre 5019/5021 User Manual ... The printed elements vary according to the settings of the device. Perform the
following steps to print the relationship. Enter the management of the system. See Calling The system of management
of the system on page 8-2. Enter the "202" number and click the "Start" button.
Workcenter 5019/5021 User manual ... The control meter can be verified using the number of pages printed from the
device. In the "meter" section of the system configuration report. Overall, the total number of printed or copied pages is
displayed. Working manual 5019/5021 ... Currently no changes are needed. • It can be replaced quickly. You need a
replacement soon. The state of the drum shows the status of the drum cartridge. • Currently no changes are required. ¢
will soon replace nAdministrative mode, input / logg system using the Loggor button. Workcentre 5019/5021 User
manual ... p. Tambourine. Contact your Local representative Xerox. • We recommend that you always have emergency
consumables / spare parts. Warning: wipe the scattered toner using a broom or wet cloth. Never use a vacuum cleaner
to eliminate overturned liquids. P. Call the Customer Service Center to find out more about periodic consumables /
spare parts, you must prepare code products. • Using consumables / spare parts, which Xerox does not recommend, can
worsen the quality and performance of the device.
Use only consumables / spare parts recommended by Xérox. By changing the toner cassette, the toner can pour and
cover the ground. We recommend that you place paper on the floor earlier. • The use of toner cartridges that are not
recommended for Xerox can alter image quality and performance. Use only cartridges of your recommended by Xerox.
─ ...
p. Never drop the toner cassette on open fire. The toner is left in the cassette, can light up and cause burns or an
explosion. You use if toner -kaset, which is no longer necessary, contact a local Xerox representative for use.
Incorporate the maintenance of the new toner cartridge and shake it slightly / downwards and 10 times on the left / left.
Note, do not touch the shutter. Workcentre 5019/5021 10-5 User management ... p. Close the front cover.
Note: If the front cover is not completely closed, the error code will appear and the device will remain suspended. 10-6
Workcentre 5019/5021 User Guide ...
These errors and icons on the device are displayed via the nearby drum. Contact youPiles can occur in hard copies or
scanned documents, and the unit can correctly recognize the size of the document. WorkCentker 5019/5021 10-9 User
Manager ... Document pressure and close cleaning of the glass strip If a sand document or a narrow glass strip is
possible, copies or scanned documents may occur and that the machine can correctly recognize the document Size. 10-
10 WorkCentre 5019/5021 User Manager ... Page 129 Do not use cleaning agents other than water cleaning or neutral
agents.
If the dirt is not easily removed, clean the narrow glass strip with a soft cloth moistened with a small amount of neutral
cleaning agents.
WorkCentker 5019/5021 10-11 User Manager ... If dirt is not easily removed, gently clean the rollers with a soft cloth
moistened with a small amount of neutral detergent. Close the power cover of the upper model until it clicks and make
sure that there is no space between the two sides of the cover and access to the model. 10-12 WorkCentre 5019/5021
User Manager ... Read Problem Problem 11-16. On the page, printing more information. See Scanning Problems 11-18.
Page If the error cannot be corrected even after reviewing the case, please contact our customer service center.
WorkCentker 5019/5021 11-1 User ... See USB interface 2-2.
Page If you don't even come, has it been checked that the environment is properly defined? Printer driver settings. He
showed the device for printing. 11-2 WorkCentre 5019/5021 User Manager ... page 133. See. Document presentation 5-
1. On the page. Good positions? Has the document been withdrawn? Merge the document and place it correctly. See.
"Loading a Document" 5-1. On the page.
WorkCentker 5019/5021 11-3 User Manual ... page 134. Some types of paper may be finely unfinished. After launching
it, place the card. The document is small. The minimum document size that cannot be fed into the document channel is
A5 documents.
11-4 WHAT137 When enlarged copies are made, some are in copies. Make a larger copy. Magnification factors can
cause banded motifs to appear. The document is corrected using the Copy Scale report. Zoom in and out to
reduce/enlarge up to 5-12 pages. factor? WorkCentre 5019/5021 11-7 User Guide ... page 138. See Replacing the photo
cartridge. Damaged. 10-7 p. Narrow strips of glass Clean a narrow strip of glass. dirty See Document cleaning and glass
strip, narrow 10-10 pages.
11-8 WorkCentre 5019/5021 User Guide ... page 149. Replace the paper with a new card. Paper fades inappropriately
on paper. Insert the correct card. fingers. The toner does not stick to the paper. The paper is dirty with toner.
WorkCentre 5019/5021 11-9 User Guide... Page 140 The paper loaded in the input tray is not the correct type and 4-9.
p. The paper size is indeed loaded. Carefully flip through several pages before loading the machine through the line
through the paper ransom.
for a generation. 11-10 WorkCentre 5019/5021 User Guide ... Page 141 Align the card horizontally and vertically by
angle on the card. Managers do not have proper interaction with managers. Correct position. See For information on
loading paper in trays 1 and 2 (optional), see steps 4-7. p. See Loading paper in the manual tray 4-9. p. WorkCentre
5019/5021 11-11 User Guide... Open the document feeder cover and remove all parts of the document. power supply.
See documentation 11-36. p. You have entered a document. You cannot send documents that contain different pages
and different sizes. dimensions. 11-12 WorkCentre 5019/5021 User Manual ... paper loaded in the tray, arrange the
instrument paper and insert it so that a small part is offset.
The leading edge of the paper is aligned with the location. Front corners of the body. WorkCentre 5019/5021 11-13
User Guide ... page 144. make sure the document format is set correctly. normal.
See Original Format 5-13. p. The paper size is not correct. checkPress zone. There is no paper. 11-16 WorkCentre
5019/5021 User's Guide ... p. The operation is not hardware (use warranty when using a printer from another company.
WorkCentre 5019/5021 User's Guide 11-17 ... the USB cable is connected to the disconnected USB cable. Cable. See 2-
2 USB interface. On page. The USB cable is connected to a compensated USB cable. Cable. See 2-2 USB interface. On
page. 11-18 WorkCentre 5019/5021 User Guide ... Place a stack of white on the document of the paper to ensure good
contact with the exposure window. WorkCentre 5019/5021 11-19 User Manual ... 150 6-1. The document is crushed.
