Xerox Versant 4100 Press, User Documentation

Page: 257 / 430

10. Press both ends of the drum cartridge to place it in a horizontal position.
11. Immediately close the drum cartridge drawer to protect the other drums from light.
12. Return the Release Handle to its original position.
13. Return the R1-R4 handle to the original position and close the press left and center front doors.
14. Insert the used drum cartridge into an empty container for recycling.
EExxtteennddiinngg FFuusseerr LLiiffee w wiitthh M Muullttiippllee FFuusseerrss
While the press is installed with only one type of fuser (standard type), the system is able to detect
three different fuser width settings. Discuss the usage of multiple fusers with your Service
Representative. Multiple fusers provide maximum print output for longer periods of time and ensure
image defects on output are avoided. Depending on the types of jobs run and their frequency, you
may want more than one fuser available, such as the following for example:
• One fuser roll for narrower paper
• One fuser for wider paper
Preventing Fuser Damage
Refer to the following information for tips on preventing damage to the fuser:
• To reduce 11 in./279.4 mm lines and wear marks, you may require the use of two fusers - one
when running 8. 5x 11 in./A4 stock and the other when running 12 x 18 in./304.8 x 457.2 mm or
larger stock. This is especially true for the graphic arts people.
• Image quality defects such as marks or spots will occur every 110 mm/4.3 in. on the prints if the
fuser roll is damaged. Defects which occur every 98 mm/3.89 in. indicate a damaged fuser belt.
Fuser Paper Width Information
The press is delivered and installed with a standard type fuser that accommodates all paper width
sizes. However, the press allows for the installation of other fuser assemblies and paper width types
for printing specific paper width ranges. When installing a new fuser, the customer can indicate that
the fuser be used for certain paper widths only. Identifying the fuser width type is performed by
connecting the appropriate fuser jumpers provided in the nationalization kit as well as attaching a
colored fuser width clip.
To optimize your image quality, you can exchange the standard fuser with a maximum of three
different width fusers. Use the different jumper resistance connectors to identify a specific fuser and
match the fuser with the designated paper width NVM settings. Also, a clip on the fuser front cover
identifies the width of the fuser being used.
Xerox ® Versant ® 4100 Press
User Documentation
257
Working With