OFF-LINE SETUP MENU
20
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL
Printer Menu
The Printer Menu allows you to control the operation of the printer.
This menu contains six options. The table below describes the
Printer Menu options and their sub-options.
Table 1.
Printer Menu options
Option
Sub-option
Function
KEYPRESS
Enables or disables an audible beeper when a
control panel key is pressed.
Settings:
ON and OFF
Default: ON
AUDIBLE INDICATORS
ALARM
Enables or disables an audible beeper when
the printer experiences a condition requiring
immediate attention.
Settings:
ON and OFF
Default: ON
READY TO POWER SAVER
Controls the length of time the printer will
remain idle before entering power saver
mode.
Settings: 5 to 50 minutes in 5-minute intervals
Default: 50 minutes
NOTE:
A value of 0 prevents the printer from
entering power saver mode.
TIMERS
POWER SAVER TO REST
Controls the length of time the printer will
remain idle in power saver mode before
entering rest mode.
Settings: 15 to 150 minutes in 15-minute
intervals
Default: 150 minutes
NOTE:
A value of 0 prevents the printer from
entering rest mode.
PRINTER ADJUSTMENTS
DENSITY
Increases or decreases the print density.
Settings:
0 (lightest) to 10 (darkest)
Default: 5
FINISHER SETTINGS
FINISHER CONFIG TYPE
Specifies the folder configuration type.
Settings: NONE (no finisher) and 003
(Generic Finisher Interface)
Default: NONE
