Windows 98 SE
Phaser® 8510/8560MFP Multifunction Product
3-14
Changing a PhaserPort IP Address
If the system’s IP address is changed, you must change the IP address for the device’s
corresponding port:
1.
Click
Start
, click
Settings
, and then click
Printers
.
2.
Right-click the system to be changed to a new PhaserPort IP address, and then click
Properties
.
3.
Select the
Details
tab.
4.
Verify that PhaserPort appears in the
Print to the Following Port
field.
5.
Click
Port Settings
. The
Configure PhaserPort
dialog box appears.
6.
Do one of the following:
a.
If you know the correct IP address or DNS name for the system, enter that
information.
b.
If you don’t know the system’s IP address or DNS name, click
Browse
to display a list
of systems on the network.
c.
Double-click the appropriate system. PhaserPort automatically enters the information
into the
Configure PhaserPort
dialog box.
Note:
To search the network again, click
Refresh.
To expand the search to other subnets,
click
Advanced
.
7.
Click
OK
.
8.
Click
OK
again to apply the changes.
