Windows NT 4.x
Phaser® 8400 Color Printer
3-23
Configuring the TCP/IP Printer Port
The Xerox TCP/IP Printer Port Wizard guides you step-by-step through the following
procedures:
■
Choosing a name for the new port
■
Identifying a printer by its DNS Name or IP Address
■
(Alternatively) Identifying a printer using the automatic
Printer Discovery
feature
To install the printer port:
1.
Click
Next
to proceed with the port installation. The wizard verifies the port name and
printer address, then configures the remaining port settings for you. Any errors detected in
printer identification are displayed in a dialog box requesting Additional Information.
2.
In the
Add Xerox TCP/IP Port
dialog box;:
■
Enter a unique name for the port being added in the
Enter a Port Name
section.
■
Enter the printer’s host name or IP Address in the
Enter a Printer Name or IP
Address
section.
Note
Click
Next
.To locate Xerox printers on your local area network, select
Auto Printer
Discovery
, then click
Refresh
. The Xerox TCP/IP Port Monitor searches the network for
Xerox printers and displays them in a list. Select the desired printer from the list, then
click
OK
.
Completing the Printer Port TCP/IP Setup
1.
Select one of these options:
■
Click
Finish
to complete the printer port setup.
■
Click
Back
to change the settings. When you have completed the changes, click
Finish
to complete the printer port setup.
2.
Click
OK
to exit
Printer Properties
.
Windows NT 4.x Troubleshooting (TCP/IP)
This troubleshooting section assumes you have completed the following tasks:
■
Loaded a Phaser printer PCL or PostScript printer driver.
■
Printed and kept a current copy of the “Configuration Page”. For information about
printing a “Configuration Page”, go to
Reference/Features/Front Panel
on the
User
Documentation CD-ROM
.
