Windows NT 4.x
Phaser® 8400 Color Printer
3-22
3.
Select the
*.INF
file, then click
Open
. Verify that the path and filename are correct, then
click
OK
.
4.
Select the correct printer, then click
OK
.
5.
Enter a name for the printer, select whether you want that printer to be the default, then
click
OK
.
6.
Select one of these options:
■
If the printer is not shared, click
Next
.
■
If the printer is shared, enter a Share Name, check the
Share
box, then click
Next
.
Printing a Test Page
You are prompted to print a test page.
1.
Select one of these options:
■
Click
Yes
to print a test page, then click
Next
.
■
Click
No
if you do not want to print a test page, then click
Next
.
2.
Select one of these options:
■
Click the
Finish
button if the data presented is correct. Proceed to step 3.
■
Click the
Back
button to correct the data if incorrect, then click
Finish
when the data
is correct. Proceed to Step 3.
3.
If you printed a test page, you are prompted to confirm that the test page printed:
■
Click
Yes
if the test page printed successfully.
■
Click
No
if the test page did not print or printed incorrectly. Proceed to step 4.
4.
Note the print-quality of the print job. If print-quality problems exist or if the job does not
print, go to
Reference/Troubleshooting
on the
User Documentation CD-ROM
.
Xerox TCP/IP Port Monitor
The Windows installer installs the Xerox TCP/IP Port Monitor for those installations using the
PCL5c driver. The Xerox TCP/IP Port Monitor is used to add or remove TCP/IP ports.
Adding the TCP/IP Printer Port
1.
Open
Printer Properties
for the printer you would like to attach to the new TCP/IP port.
2.
Click
Start
, click
Settings
, then click
Printers
.
3.
Right-click the printer to be attached to the new TCP/IP port, then select
Properties
.
4.
Select the
Ports
tab, then click the
Add Port
button.
5.
Select
Other
.
6.
From the list of available printer-port monitors, select the
Xerox TCP/IP Port
, then click
OK
.
