Phaser® 8200 Color Printer
Copyright © 2002 Xerox Corporation. All Rights Reserved.
13
Windows 95 / Windows 98 /
Windows Me Network
This section provides installation and troubleshooting steps for Windows 95 / Windows 98 /
Windows Me:
■
Preliminary steps — see page 13.
■
Quick CD-ROM install steps — see page 13.
■
Other methods of installation — see page 14.
■
Windows 95 / Windows 98 / Windows Me troubleshooting — see page 14.
Preliminary steps
1.
Print the Configuration Pages and retain them for reference.
2.
Check the Configuration Pages and verify that the desired protocol is enabled.
3.
If you don't already have a TCP/IP address configured for your PC, contact your system
administrator to ensure that the configuration is made according to your company guidelines. If
there is no TCP/IP network already in place, configure your PC with a unique address such as
192.1.1.1. To check the IP address for your PC, follow these steps:
a.
From the
Start
menu, click
Run.
b.
Type:
winipcfg.
(If the file is not found, TCP/IP may not be installed.)
c.
Click
OK.
d.
Choose your network adapter from the list. The IP address is listed in the
IP Address
field.
For more information on installing and configuring TCP/IP in Windows environments, see
your Microsoft Windows documentation.
4.
Proceed to the
Quick CD-ROM install steps
or
Other methods of installation
section for the
installation method desired.
Quick CD-ROM install steps
The Xerox installer for Windows is on the
Software and Documentation CD-ROM
. A single
integrated installer is used to install printer drivers and other software.The Xerox installer automatically
performs printer installation tasks and creates a printer. In most cases, you are required only to make a
few installation choices, clicking
Next
to move from screen to screen.
To install the drivers and other software:
1.
Insert the printer’s software CD-ROM into your CD-ROM drive.
a.
If the Windows autorun feature is enabled, the CD-ROM launches automatically.
b.
If the Windows autorun feature is disabled, double-click
My Compute
r, double click the CD
icon to access the CD-ROM, then double-click startup.exe.
2.
Follow the on-screen instructions to complete the installation.
