x
Phaser® 8200 Color Printer
User safety summary
Your printer and the recommended consumable supplies have been designed and tested
to meet strict safety requirements. Attention to the following notes will ensure the
continued safe operation of your printer.
Electrical Safety
■
Use the power cord supplied with your printer.
Warning
This device not intended for use in health care facilities as shipped. If
intended for use in health care facilities, a hospital-grade power cord must
be used.
■
Do not use a ground adapter plug to connect the printer to a power source
receptacle that lacks a ground connection terminal.
■
Plug the power cord directly into a properly-grounded electrical outlet. Do not use
an extension cord or power strip. If you do not know whether an outlet is
grounded, ask an electrician to check the outlet.
Warning
Avoid the potential of severe electrical shock by ensuring the printer is
properly grounded.
■
Do not place the printer where people may step on the power cord.
■
Do not place objects on the power cord.
■
Do not obstruct the ventilation openings. These openings are provided to prevent
overheating of the printer.
Warning
Do not push objects into slots or openings on the printer. Making contact
with a voltage point or shorting out a part could result in fire or electrical
shock.
■
The power cord is attached to the printer as a plug-in device at the back of the
printer. In the event it is necessary to remove all electrical power from the printer,
disconnect the power cord from the power receptacle.
Note
Leaving the printer on all the time is recommended for optimum
performance, and does not pose a safety hazard.
Summary of Contents for Phaser 8200
Page 1: ......
Page 2: ...Phaser 8200 Color Printer User Guide...
