Custom Size Paper
Phaser® 7750 Color Laser Printer
2-72
Push Tray 2 completely into the printer.
Selecting Custom Size Options at the Front Panel
1.
At the printer’s front panel, do one of the following:
■
Press the OK button if both the paper type and size selected are correct. Go to Step 7.
■
Select
Change
if the paper type or size selected is not correct, then press the OK
button. Go to step 2.
2.
Select the paper type, then press the OK button.
3.
Select
Custom
, then press the OK button. You are prompted to enter the custom width
and custom height.
Note
When the front panel prompts you to set
Custom Width (W)
and
Custom Height
(H)
, verify that you are selecting the correct width and height values for the paper size
and orientation (long-edge feed or short-edge feed). See the following illustration to
determine how to select the correct width and height.
4.
Select
Custom Width (W)
, press the Up or Down Arrow button to select a value, then
press the OK button.
Long-Edge Feed
Short-Edge Feed
7750-014
7750-168
H
W
7750-169
W
H
