Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
20
TCP/IP
Transmission Control Protocol (TCP) and Internet Protocol (IP) are two protocols within the Internet
Protocol Suite. IP manages the transmission of messages from one computer to another and TCP
manages the actual end-to-end connections.
Note:
You can configure IPv4 settings at the printer control panel or through CentreWare Internet
Services. You can only configure IPv6 through CentreWare Internet Services.
Enabling TCP/IP
Note:
By default, TCP/IP is enabled. If you disable TCP/IP, you must enable it at the printer control
panel before you accessing CentreWare Internet Services.
1.
At the printer control panel, press
Menu
.
2.
Navigate to
Admin Menu
, then press
OK
.
3.
Navigate to
Network / Port
>
TCP/IP Settings
>
IP Mode
.
4.
Select
IPv4 Mode
,
IPv6
, or
Dual Stack
to enable both IPv4 and IPv6, then press
OK
.
Configuring TCP/IP Settings at the Control Panel
Manually Configuring an IPv4 Network Address
1.
At the printer control panel, press
Menu
.
2.
Navigate to
Admin Menu
, then press
OK
.
3.
Navigate to
Network / Port
>
TCP/IP
.
4.
Navigate to
IPv4 Settings
, then press
OK
.
5.
Navigate to
Get IP Address
>
Static
, then press
OK
.
6.
Navigate to
IPv4 - IP Address
.
7.
Use the arrow buttons to type the static IP address, then press
OK
.
8.
Navigate to
IPv4 - Subnet Mask
.
9.
Use the arrow buttons to type the subnet mask, then press
OK
.
10. Navigate to
IPv4 - Gateway Address
.
11. Use the arrow keys to type the gateway mask, then press
OK
.
Manually Configuring an IPv6 Network Address
1.
At the printer control panel, press
Menu
.
2.
Navigate to
Admin Menu
, then press
OK
.
3.
Navigate to
Network / Port
>
TCP/IP
>
IP Mode
.
4.
Navigate to
IPv6 Settings
.
5.
Press
Enabled
, then press
OK
.