Load Paper in Trays 2-6
•
Pull out the required tray until it stops.
•
Remove any paper in the tray that is a different size.
•
Slide the length and width guides out
•
Slide the length and width guides out.
•
Fan the stack of paper to release sheets that may be
stuck together, and then align the edges of the stack on
a level surface.
NOTE: Do not load paper above the Maximum Fill Line.
•
Adjust the length and width guides until they lightly
Adjust the length and width guides until they lightly
touch the edges of the stack.
•
Close the tray.
•
If the tray is set to the "Fully Adjustable" mode, a
t
t t
th
i
t
d l ill
b
prompt to set the paper size, type, and color will be
displayed. If necessary, modify the settings and then
select the [OK] button.
4
