System Administrator Functions
12.
To activate your changes, at the prompt, click
Restart Now
.
13.
Disconnect the Ethernet cable from the printer.
Note:
When the printer restarts, it uses the information from the Embedded Web Server to connect
with the wireless router.
14.
After the printer restarts, wait two minutes, then to get the network information that includes the
IP
address, print a Configuration Report. For details, refer to
Printing the Configuration Report
on
page 29.
15.
If the printer does not successfully connect with the wireless network, check your network
information and try again.
Connecting to a Wireless Network Using the Control Panel
You can connect to a wireless network manually using the printer control panel. For details, refer to
Connecting to a Wireless Network Manually
on page 45.
Setting Up the Printer for Wireless LAN WPA2 Enterprise
WPA-Enterprise Encryption is supported only when Infrastructure is selected as the Network Type in the
Wi-Fi settings section.
Note:
To manage digital certificates, enable HTTPS communication.
1.
Import the required security certificate. For details, refer to
Importing a Digital Certificate
on
page
Note:
Use Internet Explorer to import the certificate from Windows. Use Safari to import certificates
from Macintosh.
2.
Verify the Certificate Authorities within the category. For details, refer to
Verifying the Digital
Certificate Purpose
on page 210.
3.
Configure WPA2 Enterprise. For details, refer to
Configuring WPA2 Enterprise Authentication
on
page 153.
Configuring WPA2 Enterprise Authentication
Note:
WPA-Enterprise settings are unique for each network. For details on your settings, contact
your network administrator.
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press
Enter
or
Return
.
2.
Click
Connectivity
.
Note:
If this feature does not appear, log in as a system administrator. For details, refer to
Logging
In as the Administrator
on page 186.
3.
For Connections, click
Wi-Fi
.
4.
Enter the
SSID
.
5.
For Network Type, select an option.
6.
Verify the TCP/IP Settings.
7.
For Security Settings, select an Encryption option, then enter the required information.
8.
Click
OK
.
Xerox
®
Phaser
®
6510 Color Printer 153
User Guide
Summary of Contents for Phaser 6510
