Xerox Phaser 6510 User Manual Download

Page: 29 / 236

Features

Configuration Report

The Configuration Report provides product information including, installed options, network settings,

port setup, tray information, and more.

Printing a Configuration Report at the Control Panel

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Print Reports

, then press

Navigate to

Configuration

, then press

To print the report, at the prompt, press

To return the printer to Ready, press

Menu

Configuring Printing of the Startup Page at Power On

The Startup Page provides basic printer configuration information, such as printer name, serial number,

fonts, firmware, and Ethernet versions. When this feature is on, the Startup Page prints each time you

power on your printer. If you do not want the Startup Page to print, you can disable the feature.

To configure the Startup page:
1.

At your computer, open a Web browser. In the address field, type the IP address of the printer, then

press

Enter

Return

Note:

If you do not know the IP address of your printer, refer to

Finding the IP Address of Your

Printer

on page 30.

Click

System

Click

Defaults and Policies

Startup Page

To print the Startup Page at power-on, click

Auto Print

To disable printing the Startup Page at power-on, click

Do Not Auto Print

Click

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands