Paper Jams
Phaser® 6200 Color Laser Printer
5
Preventing jams
To reduce the frequency of paper and transparency jams, use only Xerox Phaser branded paper
and media designed for the Phaser® 6200 printer. See the
Supplies
section in the
Support Guide
on the
Interactive Documentation CD-ROM
or go to the Xerox web site at:
http://www.xerox.com/officeprinting/6200supplies
to order supplies.
Fan paper prior to loading in the trays or the Multi-Purpose Tray.
For supported paper sizes, see the
Supported Papers
section in the
Trays and Paper Guide
on the
Interactive Documentation CD-ROM
.
For proper paper-loading instructions, see the
Loading Trays
section in the
Trays and Paper Guide
on the
Interactive Documentation CD-ROM
.
Use clean, undamaged paper. Do not use paper that is curled.
Load paper from a newly opened package.
Do not add paper above the tray’s fill line.
Make sure that the tray guides are properly set for the paper size.
What causes a paper jam?
Paper jams occur most often under these conditions:
An incorrect paper type was selected in the printer driver.
The paper does not meet specifications.
The loaded paper size or weight is not supported by the paper tray.
The paper is damaged, moist, curled, creased, or folded.
The paper is not loaded properly.
The tray’s side and rear guides are not adjusted properly for the paper.
The tray is overfilled; paper is loaded above the tray’s fill line.
Jam at the fuser
Follow these steps to clear the jam. Refer to the labels inside the printer for jam-clearing instructions.
1.
Use the latch on the right side of the printer to open Front Door B.
6200-65