Phaser® 6200 Color Laser Printer
Copyright © 2002 Xerox Corporation. All Rights Reserved.
2
Trays
This section covers:
■
Loading paper in Trays 1-3 — see page 2.
■
Loading paper in the Multi-Purpose Tray — see page 6.
■
Using custom size paper — see page 8.
For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,
refer to the
Supported Papers
section of the
Trays and Paper Guide
on the
Interactive Documentation
CD-ROM
.
Note
Do not load a tray that is currently being used for printing.
You MUST set the paper type in the printer’s front panel any time you add paper to the printer. If you
change paper types, take a moment to ensure that the front panel values agree with the paper you have
loaded. If you fail to do this, you can damage the printer’s fuser.
Loading paper in Trays 1-3
Caution
Phaser® 6200 Transparency film is designed specifically to work with this printer's oil-less
fuser. Using non-Phaser 6200 Transparencies might result in poor image quality and might
damage the fuser. Damage caused by using non-Phaser 6200 Transparencies is not covered
under the warranty, service agreement, or Total Satisfaction Guarantee. To order
Phaser® 6200 Transparencies, visit the
Phaser® 6200 Supplies and Accessories web site
.
DO NOT load Phaser® 6200 Transparency Film in Trays 2 or 3; use Tray 1 or the
Multi-Purpose Tray instead.
Caution
DO NOT load card stock, glossy coated paper, photo paper, envelopes, labels, business
cards, greeting cards, CD/DVD labels, and CD/DVD inserts in Trays 1-3; use the
Multi-Purpose Tray instead.
To load paper in Trays 1-3:
Instructional videos for loading trays are available on the
Interactive Documentation
CD-ROM
or the Xerox web site at:
www.xerox.com/officeprinting/6200support/
You can also refer to the labels inside the printer for paper loading instructions.
Note
If you change the type of paper, you MUST
specify the type on the front panel of the printer.
OK
6200-46
