Color Registration
Phaser® 6130 Printer
6-7
Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the
values of the straightest lines.
When “0” is the value nearest the straightest line, you do not need to adjust the color
registration. When the value is not “0”, follow the procedure outlined in “Entering Values”.
Note:
You can also use the densest colors of the grid to find the straightest lines. The colors
printed at the highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration Correction
Chart to make adjustments.
1.
Press the
Menu
button to display the
Menu
screen.
2.
Press the
Up Arrow
or
Down Arrow
button until
Admin Menu
is displayed, then press
the
Forward Arrow
or
OK
button.
3.
Press the
Up Arrow
or
Down Arrow
button until
Maintenance Mode
is displayed, then
press the
Forward Arrow
or
OK
button.
4.
Press the
Up Arrow
or
Down Arrow
button until
Adjust ColorRegi
is displayed, then
press the
Forward Arrow
or
OK
button.
5.
Press the
Up Arrow
or
Down Arrow
button until
Enter Number
is displayed, then press
the
Forward Arrow
or
OK
button.
6.
Press the
Up Arrow
or
Down Arrow
button until you reach the value displayed on the
chart.
7.
Press the
Forward Arrow
button once and move the cursor to the next value.
8.
Repeat steps 6 and 7 to continue adjusting the color registration.
9.
Press the
OK
button twice. The Color Registration Correction Chart is printed with the
new values. When printing is finished, the print screen is displayed again.
10.
Color registration adjustment is complete when the straightest Y (yellow), M (magenta),
and C (cyan) lines are next to the “0” line.
If “0” is not next to the straightest lines, determine the values and adjust again.
Note:
After printing the Color Registration Correction Chart, do not turn off the printer until
the printer motor has stopped running.
