Phaser® 6115MFP Multifunction Product
EN - 4
Network Connection
Network Connection
Use an Ethernet connection with two twisted-pair (Category 5/RJ-45)
cables and an Ethernet hub or router. If your computer is on a large
network, contact your network administrator for the appropriate TCP/IP
addresses and additional configuration information.
Note:
You cannot scan to applications or use the MCC software over a
network connection.
Local Area Network
A Local Area Network, or
LAN
, is a collection of computers, printers,
and other devices connected to share information. The most common
LAN uses Ethernet and the TCP/IP protocol to provide communication.
■
TCP/IP
requires all devices to have a unique IP Address, similar to
the way telephone numbers are unique.
■
IP addresses can be assigned
Manually
(
Static
) by the user.
■
IP addresses can be assigned
Automatically
(
Dynamic
) by a
DHCP Server
,
which is built into a router. A valid IP address is
obtained from the DHCP Server when you connect your Xerox
product to the LAN.
For more information on networks and protocols, see the
User Guide
.
Manually Setting the Product’s IP Address
1.
On the control panel, press the
Menu/Select
button.
2.
Using the
Up Arrow
or
Down
Arrow
button, scroll to
Network
Setup
, and then press the
Menu/Select
button.
3.
Using the
Left Arrow
or
Right Arrow
button, select
Static
, and
then press the
Menu/Select
button.
4.
Scroll to
IP Address
, and then press the
Menu/Select
button.
5.
Enter the IP Address using the numeric keypad.
6.
Press the
Menu/Select
button to save the IP address.
7.
Follow the above steps to set the
Subnet Mask
and
Gateway
addresses, if necessary.
Summary of Contents for Phaser 6115 MFP
Page 1: ......
Page 2: ......
Page 14: ...Phaser 6115MFP Multifunction Product EN 12...
Page 75: ......
