Xerox Fiery EXP4110, Configuration And Setup

Page: 27 / 108

S
ETTING UP THE
F
IERY
EXP4110
FROM THE
C
ONTROL
P
ANEL
27
Secure Print
Allows users to control Secure Print jobs. To access Secure Print jobs, a password is required.
The user defines and enters the password in the Secure Print option from the
Windows 2000/XP/Server 2003 or Mac OS X printer driver. For more information, see
Print Options .
Select a Secure Print job from a list, and choose an action from the submenu that appears:
Print and Delete:
Prints and deletes the Secure Print job immediately.
Print and Hold:
Prints the Secure Print job immediately and holds a copy of the job as a
Secure Print job. To print or delete this copy, its password is required through this Secure
Print command.
Delete:
Deletes the Secure Print job without printing.
N
OTE
:
Secure Print jobs are not accessible from the job management tools.
N
OTE
: The Secure Print feature is supported on Windows 2000/XP/Server 2003 and
Mac OS X only.
Shut Down Shut down all Fiery EXP4110 activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the Fiery EXP4110. The following
options are available from the submenu that appears:
Restart Server:
Resets the server software but does not reboot the entire system. Network
access to the Fiery EXP4110 is temporarily interrupted and all currently processing jobs are
aborted and might be lost.
Shut Down System:
Shuts down all Fiery EXP4110 activity properly.
Reboot System:
Shuts down and then reboots the Fiery EXP4110.
Clear Server Clear all jobs in all server queues, as well as all jobs archived on the Fiery EXP4110 hard
disk, the index of archived jobs (in the Archive window), all FreeForm
™ masters, and the
index of FreeForm masters (in the FreeForm window). Consult with your administrator or
operator before choosing Clear Server. If an Administrator password has been set, you must
enter it to access Clear Server.
Run Setup Enter the Setup menu and change Setup option settings.
Run Diagnostics This function is provided for service representatives only. For information about running
diagnostics, contact your authorized service/support technician.
Tray Alignment Adjust the placement of text and images on a page so that they are correctly aligned on the
sheet of paper and both sides of a duplex sheet have the exact same alignment. For more
information about this function, see
Utilities .