Xerox FaxCentre F116 Service Manual Download Page 60

Page: 60 / 196

Repairs/Adjustments

4-20

9/04

FaxCentre F116/F116L

• Press the control panel opening lever.

• Press outwards on the latch and release the stop.

• Press outwards on the latch, hold and extract the white roller.

• Remove and keep the pinion and the bearings.

Assembly

• Unpack the new white roller and inspect it visually. Fit the bearings and pinion on the

new roller.

• Place the new white roller assembly in end housing B, oriented the same way as dur-

ing disassembly.

• Press on the latch and place the other end of the white roller in end housing A.

• Press on the latch and close the control panel, letting the stop lock behind the latch.

Summary of Contents for FaxCentre F116





































































































































































































Search results

Summary of Contents for FaxCentre F116

Reviews:

Related manuals for FaxCentre F116

Brands by name

Popular brands

Xerox FaxCentre F116, Service Manual

Search results

Summary of Contents for FaxCentre F116

Reviews:

Related manuals for FaxCentre F116

Brands by name

Popular brands